You have no items in your shopping cart.
SPECIFICATIONS:Type: Heat Transfer Vinyl (Iron-on Vinyl)Width: 12 inchesLength: 19 inchesThickness: 112 microns/ 0.112 mmEasy260™ process: YesTemperature: 260°F/126°CSettings for regular iron: Silk/Medium or higher (NO higher than Wool)Time: 30 SecondsPressure: MediumPeel: WARM or COLDLayer: Can be layeredComposition: Polyethylene Terephthalate (PET), Strontium AluminateSafety: CPSIA certified/OEKO-TEX® Standard 100 in APPENDIX 6, Class II certified/Compliance with California Prop 65 APPLIES TO100% Cotton • 100% uncoated Polyester • Silk • Poly/Cotton blends • Lycra®/Spandex • Leather • Fake Leather • Paper • Rayon and more. ADDITIONAL INSTRUCTIONS:Cut settings: Please cut on the glue side(load to the machine with shiny side down), and cut with mirror mode on(reverse).Kiss Cut means the machine cut though the glue and material only, leave the carrier in one piece.Die cut means all the layers are cut and separate the design into individual parts. Cut Settings for Cricut®:Settings can alter on how dull or sharp the blade is. Test cutting is recommended.Kiss Cut: Iron-On+Die Cut: Poster BoardPressure: DefaultCut Settings for Silhouette® Cameo: Settings can alter on how dull or sharp the blade is. Test cutting is recommended.Kiss Cut:Material: Heat Transfer, FlockedDie Cut: Material: Heat Transfer, FlockedPasses 2 times Pressing instructions: We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.If you used regular iron instead of heat press, we highly recommend to cover your garment and the vinyl with parchment paper/cotton cloth when applying. This prevents overheating and also equalize the uneven temperature of iron plate a bit. CARE INSTRUCTIONS:Do not iron the peeled vinyl without covering with parchment paper/carrier sheet/ cotton cloth • Do not dry clean • Machine wash WARM / mild detergent • Dry at normal setting • No chlorine bleach • Wait 24 hours before first wash